Mobile Stables

Available in our Value or Clipper specification, our mobile stables are built to be moved with ease.

Mobile Stables offer durable protection for all livestock, (not just horses), and can easily be moved around the paddock by a 4x4 or tractor. Both the Value and Clipper Mobile Stables are supplied on either timber or metal skids and are ideal for summer and winter grazing paddocks or for farms where field rotation means horses are moved from year to year.

Mobile Stables can be easily moved around the paddock

Mobile Stables are available either as a single, double or treble unit, with or without canopies. They are constructed in the same way as our Mobile Field Shelters and can be moved by most four wheel drive vehicles.

Main Features

Clipper Range Mobile Stables: As above but:

• • Pressure treated external timbers
  • 75mm x 75mm (3” x 2”) timber framing
  • 1.2m (4’) canopy / overhang
  • Front guttering and downpipe
  • 11mm OSB kickboards to 1.2m (4’)
  • Complete Stable door with galvanised fittings
  • Clear roof sheet
  • Black Onduline roof
  • Pressure treated timbers externally and internally (not including roof purlins)
  • Heavy duty 18mm (¾”) kickboards to 1.2m (4’)
  • 736mm x 736mm (29”sq) fully opening windows with internal safety mesh
  • Stable door with extended ‘bib’
  • Anti-chew Stripping
  • A Talk Grille is fitted to the dividing panel in double and treble units measuring 552mm x 864mm
    (22” x 34”)
  • One clear Onduline roof sheet to each Loose Box section

Value Mobile Stables

See Below for Clipper Mobile Stable Specification

Wall Construction

Walls are built with 75mm x 50mm (3” x 2”) timber framing, spaced at 600mm (2’) centres.

Wall Cladding

Selected high quality Shiplap boarding, pressure treated to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding is fixed with rust resisting nails.

Roof Construction

Purlins are 100mm x 50mm (4” x 2”) spaced at 600mm (2’) centres, held in place by joist holders on prefabricated trusses, then covered with black Onduline roof sheeting. One clear roof sheet is fitted to each Stable, Corner Unit and Tack Room. Optional roof finishes include coloured Onduline, felt or felt tiles.

Doors

Stable doors are 2085mm high, 1200mm wide, 50mm thick, (6’10” high, 4’ wide, 2” thick) Bottom doors are lined with 18mm (3/4”) heavy duty OS Board. Top doors are ledged and braced. Anti-chewstrips are fitted to the top of the lower door. All door fittings are heavy duty and galvanised, to include 450mm (18”) heavy tee hinges, 200mm (8”) pad bolts, heavy duty kickbolts and a cabin hook to the top door. Tack Room doors are ledged and braced and fitted with a 200mm (8”) pad bolt.

Windows

Are available as an optional extra. However a clear roof sheet is fitted as standard.

Kickboards

Loose Boxes are lined to 1200mm (4’) with 11mm OS Board and can be fully lined to eaves if required. Tack Rooms and Hay Stores are not lined as standard but can be lined if required.

Ventilation

Louvred ventilation grilles are fitted to gable ends of Loose Boxes only.

Canopy/Overhang

Front overhangs extend to 1200mm (4’) and can be underlined as an optional extra.

Guttering

Half round, black guttering and downpipe is fitted to the front of all units. Rear guttering is available on request.

Height

To eaves, measures 2235mm (7’4”) and to ridge 2845mm (9’4”), including brickwork.

Talk Grilles

Can be fitted between Loose Boxes as an option.

Barge Boards

All in pressure treated, prepared timber, fixed with rust resisting nails.

Timber Treatment

All exterior timber is pressure treated.

Clipper Mobile Stables

See Above for Value Mobile Stable Specification

Wall Construction

Walls are built with 75mm x 50mm (3” x 2”) pressure treated timber framing, spaced at 600mm (2’) centres.

Wall Cladding

Selected high quality Shiplap boarding, pressure treated to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding is fixed with rust resisting nails.

Roof Construction

Purlins are 100mm x 50mm (4” x 2”) spaced at 600mm (2’) centres, held in place by joist holders on prefabricated trusses, then covered with black Onduline roof sheeting. One clear roof sheet is fitted to each Stable, Corner Unit and Tack Room. Optional roof finishes include coloured Onduline, felt or felt tiles.

Doors

Stable doors are 2085mm high, 1200mm wide, 50mm thick, (6’10” high, 4’ wide, 2” thick). Bottom doors are lined with 18mm (”) heavy duty, moisture resistant kickboard. Top doors are ledged and braced. Anti-chewstrips are fitted to the top of the lower door (extended down 380mm (15”) as a ‘bib’). All door fittings are heavy duty and galvanised, to include 450mm (18”) heavy tee hinges, 200mm (8”) pad bolts, heavy duty kickbolts and a cabin hook to the top door. Tack Room doors are ledged and braced and fitted with a 200mm (8”) pad bolt.

Windows

A fully opening 740mm x 740mm (29” x 29”) Perspex window, protected by a safety mesh is standard to each Loose Box. Other windows are available on request.

Kickboards

Loose Boxes are lined to 1200mm (4’) with 18mm (”) high density, moisture resistant board and can be fully lined to eaves if required. Tack Rooms and Hay Stores are not lined as standard but can be lined if required. As standard the external walls of Tack Rooms and Hay Stores are diagonally braced for extra strength.

Ventilation

Louvred ventilation grilles are fitted to gable ends of Loose Boxes only.

Canopy/Overhang

Front overhangs extend to 1200mm (4’) and can be underlined as an optional extra.

Guttering

Half round, black guttering and downpipe is fitted to the front of all units. Rear guttering is available on request.

Height

To eaves, measures 2235mm (7’4”) and to ridge 2845mm (9’4”), including brickwork.

Talk Grilles

One 552mm x 864mm (22” x 34”) Talk Grille is fitted between Stables as standard.

Barge Boards

All in pressure treated, prepared timber, fixed with rust resisting nails.

Timber Treatment

All timber is pressure treated (not including roof purlins).