Value Garages and Workshops

Our new value range of timber garages and workshops offer exceptional value for money.

These garages and workshops carry a number of features usually found on more expensive buildings. Timber Garages are one of our most popular products - and this new Value Range is set to become one of our biggest sellers.

Main Features

• Pressure treated external timbers
• 75mm x 50mm (3” x 2”) timber framing
• 100mm x 50mm (4” x 2”) roof purlins
• Guttering and downpipes to both sides as standard
• 2.1m (7’) wide double doors as standard
• Ply lined doors / 457mm (18” ) Tee Hinges / Pad Bolt / Drop Bolt / Tower Bolt & Cabin Hooks
• 4.8m (18’) wide buildings will have 2 sets of 2.1m (7’) double doors as standard
• Black Onduline roof

Options and Roof Finishes

• Choose from our extensive range of external doors and door hardware.
• Choose to have either timber or metal doors, opening outwards or opt for an up and over style.
• We have an extensive range of windows, in different designs and sizes to meet your requirements.
• We offer a choice of wood finishes including: Shiplap, Weatherboard and Loglap, all pressure treated.
• For the roof, you are spoilt for choice, with more than 5 finishes and a variety of colours available.

Wall Construction

Garage and Workshop walls are built with 75mm x 50mm (3” x 2”) timber framing, spaced at 600mm (2”) centres, and diagonally braced at corner sections

Wall Cladding

Selected high quality Shiplap or Weatherboard, pressure treated to ensure a long maintenance-free life. All boarding is fixed with rust resisting nails.

Wall Lining

Reinforced moisture resistant bitumen impregnated lining paper to BS 1521 (120gsm) grade. This is placed between the studwork and cladding. Various wall linings and Rockwool insulation are available on request.

Roof Construction

Purlins are 100mm x 50mm (4” x 2”) which are held in place by joist holders on prefabricated trusses, then covered with black onduline roof sheeting. Options include coloured Onduline and felt.

Doors

Doors are framed, ledged and braced, faced with Shiplap and a ply interior lining, Double 2.1m (7’) wide doors fitted with 457mm (18”) Tee hinges as standard. Also available are personal inward or outward opening doors, joinery grade doors with frames. 4.8m (18’) wide buildings will have 2 sets of 2.1m (7’) double doors as standard

Windows

A extensive range of single and double glazed and unglazed casement windows are available.   

Height

To eaves either 2235mm (7’4”) or 2464mm (8’1”) when on a single course of brickwork. Apex height will vary depending upon the width of the building.

Guttering

Black 100mm (4”) half round guttering and downpipes are fitted to both sides of the building

Barge Boards

All in pressure treated, prepared timber, fixed with rust resisting nails.

Floors (For workshops)

Can be fitted as an optional extra. High density, flooring grade 18mm (¾”) V313 moisture resistant board is placed on 75mm x 50mm (3” x 2”) pressure impregnated timbers spaced at 406mm (16”) centres. Alternatively, tongue and grooved floor boarding is available.

Timber Treatment

All timber is pressure treated, (excluding roof purlins).